T1R Suspension

T1R Suspension

Products

HRP Coilover Covers
HRP Coilover Covers protect your expensive aftermarket coilovers from dirt, sand, rocks, mud, and corrosion. Most aftermarket coilovers come with only a dust boot to protect the shaft of the damper. Unfortunately, it is still common for mud and sand to work its way into the dust boot and damage the damper, often leading to a full rebuild of the coilover. In addition, mud and sand often become t...

Price: CAD $80.00 (Approx USD $70.40)
T1R B52 Coilover Suspension for Evo X
Comfort and performance normally is not a combination you can find from most of the suspension available on the market. The T1R B52 Coilover Suspension features:
  • 46mm piston, monotube damper design for maximum damp...

T1R Front Anti-Bump Steer Kit for Honda S2000
Do you ever notice how your wheel tugs when driving over un-even roads at high speeds on a lowered S2000? The angle on the steering tie rod has changed due to the lower ride height from coilovers or lowering springs..etc. The factory has designed the steering system to be optimized at the stock height. It takes very little angle in the wheel to make the car steer. The T1R bumpsteer kit returns ...

Price: CAD $115.00 (Approx USD $101.20)
T1R Half-Shaft Spacers for Honda S2000 (Race)
When lowering a S2000 , its driveshaft angle will definitely need re-adjustments due to the modifications applied, in this case, the lowering of the suspension. This is due to the fact that lowering a S2000 creates unwanted space in between the driveshaft roller and spider (inside of the driveshaft), causing the inboard joint to unevenly wear out. With the installation of T1R Half shaft spacers...

Price: CAD $175.00 (Approx USD $154.00)
T1R Half-Shaft Spacers for Honda S2000 (Street)
When lowering a S2000 , its driveshaft angle will definitely need re-adjustments due to the modifications applied, in this case, the lowering of the suspension. This is due to the fact that lowering a S2000 creates unwanted space in between the driveshaft roller and spider (inside of the driveshaft), causing the inboard joint to unevenly wear out. With the installation of T1R Half shaft spacers...

Price: CAD $135.00 (Approx USD $118.80)
T1R Rear Anti-Bump Steer Kit for Honda S2000
The T1R anti-bumpsteer kits replaces the the rear toe rod of the S2000. By replacing it, it solves two of the most common problem of the S2000 rear suspension: It reduces and nearly eliminates potentially dangerous bumpsteer in cars lowered up to 2.5-3 inches. It also allows independent adjustment of rear toe, camber and the rod leveling. The T1R anti-bumpsteer kit is made out of A6061 forged a...

Price: CAD $395.00 (Approx USD $347.60)
T1R S-Coil Lowering Springs for 08+ Mitsubishi Lancer
Introducing the new T1R S-Coil Lowering Springs for 08+ Mitsubishi Lancer (CY4S). The S-Coil springs offer a drop of roughly 30mm (1.2") front and rear. Spring rates are front 2.91K and rear 3.65K. Each spring is made out of SAE9254 cold-wounded steel with special powder coat to prevent corrosion. Maximum performance you can get while lowering the car as much as possible without sacrficing susp...

Price: CAD $199.00 (Approx USD $175.12)
MSRP: CAD $220.00 , Save 10%
T1R S-Coil Lowering Springs for 09+ Mitsubishi Lancer Ralliart
Introducing the new T1R S-Coil Lowering Springs for 09+ Mitsubishi Lancer Ralliart. The S-Coil springs offer a drop of roughly 30mm (1.2") front and rear. Spring rates are front 2.91K and rear 3.65K. Each spring is made out of SAE9254 cold-wounded steel with special powder coat to prevent corrosion. Maximum performance you can get while lowering the car as much as possible without sacrificing s...

Price: CAD $199.00 (Approx USD $175.12)
MSRP: CAD $220.00 , Save 10%